Edge 1500 motor: no thermistor installed inside the motor
The tip of the screwdriver points to the stub end of the white wire.
Edge 1500 motor: 10k NTC thermistor installed
Low- and High-profile M4x10 bolts
I replaced the stock high-profile bolts on the drive side of the Edge1500 motor with the low-profile bolts so that my rear derailleur cage could shift into the large sprocket without striking the bolt heads. The low-profile heads take a 2.5mm Allen key, but the high-profile heads take a 4mm.
Edge 1500 installed, right rear view
Edge 1500 installed, rear view (1)
Notice that the low-profile hex socket screws do not extend beyond the right side plate.
Edge 1500 installed, rear view (2)
Pursuit F2, right side view
Pursuit F2, left side view
Edge 1500 installed, left rear view
