Go back to blog.

MAC-BMC 300-watt Motor

<<  Index page 1 2  >>

Motor rotor (left) and stator (right) Temperature switch glued to chassis next to wire entry. Closeup of Hall device position.
Motor rotor (left) and stator (right)
2010/10/10 11:07:32
Temperature switch glued to chassis next to wire entry.
2010/10/10 11:07:54
Closeup of Hall device position.
2010/10/10 11:08:09
Rotor positioned on stator. Motor is approximately 2.5 Motor case is approximately 5 inches diameter.
Rotor positioned on stator.
2010/10/10 11:08:47
Motor is approximately 2.5" deep.
2010/10/10 11:13:53
Motor case is approximately 5 inches diameter.
2010/10/10 11:14:05

Click on a picture to enlarge it.

Generated by Galerie
2011/April/8