M1 motor: Halls positioned for Infineon controller (1).

2011/01/1 11:25:52

Halls on other side of stator are for Headline controller (12t/8p). Note that these Halls are positioned on the edge of the tooth immediately to the left of the stock Hall position. (Halls on M4 are positioned on the edge of the tooth immediately to the _right_ of the stock Hall position.)

Exposure mode: program (auto)
Metering Mode: matrix
Exposure time: 0.0100 s (1/100)
Aperture: f/3.2
Focal length: 10.4mm (35mm equivalent: 49mm)
ISO: 400
Flash: No
File size: 1832732 bytes
Camera maker: FUJIFILM
Camera model: FinePix F10
Resolution: 2718 x 1813

Page 27 / 31